Gate Opener and Driveway Gate Installation in McKinney
Whether you want to automate the gate you already have or start with a new driveway gate, a good install begins with the gate, the posts and the power. Get those right and the opener has an easy job for a long time.
Open 24 hours, 7 days a week

Signs it is time for a new opener or gate
You still get out of the car to open the gate
A manual gate in the rain, after dark or on a summer afternoon gets old fast. Most sound swing and sliding gates can be converted to automatic.
Your opener is old and parts are scarce
Once a board or gearbox is discontinued, every repair gets harder. A new opener can make more sense than chasing parts.
The opener is too small for the gate
A light-duty opener on a heavy iron leaf, or one sized for a short gate on a wide one, strains, runs hot and wears out early.
The gate itself is failing
A rotted wood gate or a frame that keeps cracking will not stand up to automation. A new gate and opener together may be the better plan.
There is no power at the gate
Long drives on acreage around Lucas, Fairview, Melissa and Anna often have no outlet near the road. Solar openers and low-voltage wire runs are both options.
The opener lacks current entrapment protection
Older openers may not support the monitored sensors that current safety standards call for. A newer opener and sensors bring the gate up to date.
Manual to automatic gate conversion
Converting an existing gate starts with a close look at the gate itself. It has to swing or slide freely by hand, hang level, and sit on posts and hinges that can take the added load. If the gate drags or a post leans, that gets corrected first, because an opener only makes those problems wear faster.
From there we choose the opener, the mounting position and the power source, set up the remotes, and adjust travel limits and force so the gate opens and closes smoothly and reverses when it meets an obstruction.
Choosing a swing, sliding or solar gate opener
Swing gates use linear arm, articulated arm or underground operators, and double gates need a dual operator or two synchronized arms. Sliding gates use a pad-mounted operator that drives a chain or a gear rack, and cantilever gates ride on rollers with no track across the drive. Gate weight, length, how often it runs and how much wind it catches all narrow the choice.
Power matters as much as the motor. Where AC power is close by, a low-voltage opener with battery backup keeps working through an outage. Where it is not, a solar gate opener with the right panel and battery can be the simpler route. If a new line-voltage circuit is needed at the gate, a licensed electrician handles that part.
New driveway gate installation
For homes that need a gate from scratch, we install new swing, sliding and cantilever driveway gates along with the posts, footings and opener. Common choices around McKinney include steel and iron-style gates on brick homes, wood-faced privacy gates, and simple pipe or ranch gates on acreage. A pedestrian gate beside the driveway gate is often added at the same time.
Many neighborhoods in McKinney, Prosper and Celina have HOA design rules covering gate height, style and color. Check with your HOA before ordering so the design is approved the first time.
What an installation includes
A typical opener or gate installation covers:
- A site check for slope, swing clearance, drainage and power
- Posts, concrete footings and an operator pad where needed
- Opener mounting, brackets and low-voltage wiring in conduit
- Photo eyes, safety edges and exit loops as the layout requires
- Remote setup, limit and force adjustment, and a manual release walkthrough
- Warning signs and a full test of every safety device before we leave
Commercial, HOA and storage gates
Gates at businesses, apartment communities, HOA entrances and storage yards can open many times a day, which calls for a high-cycle operator built for that duty. Tell us roughly how often the gate will run and what kind of traffic uses it, so the opener and safety devices are sized to match.
What affects the cost
The price depends on whether you are automating an existing gate or adding a new one, the gate size and material, the opener type, how far power has to travel, any concrete or driveway cutting, and the safety devices the layout needs. Call for pricing, and ask about current discounts.
Check these before you call
- Push the gate by hand to see whether it moves freely and stays level
- Note where the nearest outlet or power source is
- Measure the opening width and gate height if you can
- Check your HOA rules for gate style, height and color
- Take photos of the gate, both posts and the driveway for the quote form
Safety first
An automatic gate is a heavy machine that runs on its own, so it needs entrapment protection from day one. Keep remotes away from children, mount any controls well away from the gate, and learn where the manual release is before you need it. Never let anyone ride on or play around a moving gate.
Common questions
Can my manual gate be made automatic?
Most can, as long as the gate is sound, moves freely and hangs on posts that can carry it. We check those first and tell you if anything needs repair before an opener goes on.
Swing or sliding: which opener fits my driveway?
It depends on the gate you have, the slope, how much room the gate has to swing, and whether there is space beside the drive for a sliding gate to travel.
Do I need power at the gate?
Not always. Solar openers work well on many residential gates. If you want AC power at the gate, a licensed electrician installs the new circuit.
Do you install new driveway gates as well as openers?
Yes. We install new swing, sliding and cantilever gates, the posts and footings that carry them, and the opener and safety devices.
How much does gate opener installation cost?
It depends on the gate, the opener, the power source and the site work. Call (469) 634-3100 for pricing and ask about current discounts.
Related gate services
Need gate opener installation in McKinney?
Open 24 hours, 7 days a week. Call for pricing on your gate. Ask about current discounts when you call.